Canon ZR-800 Instruction Manual page 48

Trouble? •••••- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Problem Solution
[IJ
Video noise appears on the TV When using the camcorder in a room where a TV is located,
-
screen. keep a distance between the compact power adapter and the
power or antenna cables of the TV.
The tape stops during record To protect the tape and video heads, the camcorder will enter
-
pause or playback pause. the stop mode (II) if left in playback pause
(~II)
or record
pause (e
II)
mode for 4 minutes 30 seconds. To resume the
operation press
lStart/Stop)
(when recording) or push the joystick
(~)
towards
~/II
(during playback).
Recording
Problem Solution
[IJ
Set the camcorder to
(CAMERI~I22I].
Image will not appear on the
23
screen.
"SET THE TIME ZONE, DATE Set the time zone, date and time.
21
AND TIME" appears on the
Replace the backup lithium battery and set the time zone, date
16
screen.
and time.
Set the camcorder to ICAMERlHg§J]. Pressing the start/stop button 23
will not start recording.
Load a cassette.
17
Tape reached the end
("~
END" appears on the screen).
17
Rewind the tape or replace the cassette.
Cassette is protected ("
~"
flashes on the screen). Change the
52
position of the protect switch.
Camcorder will not focus. Autofocus does not work on that subject. Focus manually.
35
If you are using the viewfinder, adjust it with the dioptric
18
adjustment lever.
Lens is dirty. Clean the lens with a soft lens-cleaning cloth.
53
Never use tissue paper to clean the lens.
Sound is distorted. When recording near loud sounds (such as fireworks or
-
concerts), sound may become distorted.
Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever.
18
Playback
Problem
Solution [IJ
During playback there is video Video heads are dirty. Clean the video heads.
2
noise.
Pressing the playback button Load a cassette.
17
does not start playback.
PLAY~e1U]
.
Set the camcorder to
I
25
Tape reached the end
("~
END" appears on the screen).
17
Rewind the tape.