Copier; Copy; Making A Copy - Panasonic KX-MC6260E Operating Instructions Manual

Colour laser multi-function printer
Hide thumbs Also See for KX-MC6260E:
Table of Contents

Advertisement

Copy

5 Copier

5.1 Making a copy

5.1.1 Using the scanner glass
{Copy}
{Black}
{Set}{ V }{^}{<}{>}
1
If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2
Set the original (page 21).
3
If necessary, change the copy settings according to
the type of document.
L To change the number of copies, see page 39.
L To select the contrast, see page 39.
L To select the resolution, see page 39.
L To select the zoom rate, see page 39.
4
{Black}/{Colour}
L The unit will start copying.
5
After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
L To stop copying, see page 80.
L You can change the default operation mode (feature
#463 on page 61) and the timer before returning to
the default operation mode (feature #464 on page
61).
L If the {Fax Auto Answer} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select "Copies".
2. Enter the number of copies (up to 99).
3. {Set}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select "Contrast".
{Colour}
{Stop}
{Fax Auto Answer}
2. Press {<} or {>}. i {Set}
Note:
L You can hold the previous contrast setting (feature
#462 on page 60).
To select the resolution
1. Press {V} or {^} repeatedly to select
"Resolution".
2. Press {<} or {>} repeatedly to select the desired
resolution.
– "Text/Photo": For both text and photographs.
– "Text": For text only.
– "Photo": For photographs, shaded drawings,
etc.
3. {Set}
Note:
L You can change the default resolution (feature #461
on page 67).
To select zoom rate (enlargement/reduction)
1. Press {V} or {^} repeatedly to select "Zoom".
2. Press {<} or {>} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
– "100%"
– "50%"
– "200%"
*1
– "Letter→A4"
*2
– "A4→Letter"
*1
– "Legal→A4"
– "Legal→Letter"
*1 Make sure A4-size recording paper is installed.
*2 Make sure letter-size recording paper is installed.
L You can enter the desired percentage from
"25%" to "400%" specifically by using the dial
keys.
3. {Set}
Note:
L Zoom copy is not available for the following features:
– Quick ID copy feature (page 41)
– Easy repeat feature (page 41)
– Poster feature (page 42)
– N in 1 feature (page 42)
– Separate N in 1 feature (page 42)
– Booklet feature (page 43)
L You can hold the previous zoom setting (feature #468
on page 67).
L When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
L When using the automatic document feeder, the
unit will only enlarge the centre of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
5. Copier
*2
39

Advertisement

Table of Contents
loading

Table of Contents