Table of Contents
Advertisement
5. Copier
L You can press {Black}/{Colour} anytime to
start copying.
Easy repeat feature:
{Black}/{Colour}
8
After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.3 Poster feature (Scanner glass only)
You can make copies divided into 4 ("2×2") or 9 ("3×3")
sections to make enlarged copies of the individual
sections. You can then glue them together to make a
poster.
1
Set the original (page 21).
2
Press {V} or {^} repeatedly to select "Page
Layout". i {<}/{>}
3
Press {V} or {^} repeatedly to select "Poster". i
{Set}
4
Press {V} or {^} repeatedly to select "2×2" or
"3×3". i {Set}
5
If necessary, enter the number of copies (page 39).
L Other copy settings are also available. See page
39 for details.
6
{Black}/{Colour}
7
After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
5.2.4 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1
Set the original (page 21).
L To make a portrait copy, set the original in portrait
direction. To make a landscape copy, set the
original in landscape direction.
2
Press {V} or {^} repeatedly to select "Page
Layout". i {<}/{>}
3
Press {V} or {^} repeatedly to select "N in 1". i
{Set}
4
Press {V} or {^} repeatedly to select the desired
page layout.
– "2 in 1 (Portrait)"
– "2 in 1 (Landscape)"
– "4 in 1 (Portrait)"
– "4 in 1 (Landscape)"
– "8 in 1 (Portrait)"
– "8 in 1 (Landscape)"
42
5
{Set}
6
If necessary, enter the number of copies (page 39).
L Other copy settings are also available. See page
39 for details.
7
When using the scanner glass:
1. {Black}/{Colour}
L The unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}. Repeat this until all the
documents are scanned.
L The unit will start copying.
L You can press {Black}/{Colour} anytime to
start copying.
When using the automatic document feeder:
{Black}/{Colour}
8
After you finish copying, press {Stop} to reset this
feature.
Note:
L You can save the previous page layout setting
(feature #467 on page 67).
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the "2 in 1" and "4 in 1"
settings.
1. Set the original (page 21).
2. Press {V} or {^} repeatedly to select "Page
Layout". i {<}/{>}
3. Press {V} or {^} repeatedly to select "Separate N
in 1". i {Set}
4. Press {V} or {^} repeatedly to select the desired
page layout.
– "2 in 1 (Portrait)"
– "2 in 1 (Landscape)"
– "4 in 1 (Portrait)"
– "4 in 1 (Landscape)"
5. {Set}
6. If necessary, enter the number of copies (page 39).
L Other copy settings are also available. See page
39 for details.
7. {Black}/{Colour}
8. After you finish copying, press {Stop} to reset this
feature.
5.2.5 Copy reservation
You can make a copy reservation under the following
conditions:
– while the unit is printing documents from your
computer.
– while the unit is printing received fax documents.
– while the unit is performing direct printing.
1
Set the original (page 21).
Advertisement
Table of Contents
