Table of Contents
Advertisement
8. Programmable Features
Features Summary
8 Programmable Features
8.1 Programming
{Menu}
{Set}
1
{Menu}
2
Press {#} and the 3-digit code (page 59 to page
75).
3
Press the appropriate selection to display the
desired setting.
L This step will vary depending on the feature.
4
{Set}
5
Press {Menu} to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Advance Configuration]: advanced features for
each mode
[Network Configuration]: network features
3. Type "root" as the user name, then enter the
password (feature #155 on page 59). i [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit information.
L This step will vary depending on the feature.
6. [Submit]
L The new data will be transferred to the unit.
7. Close the web browser.
Note:
L The settings displayed in the web browser will be
updated by clicking [Reload].
58
Advertisement
Table of Contents
