Table of Contents
Advertisement
10. Help
Display
"RX Memory Full"
"Same name already
exists."
"Scanner Position Error"
"SD Card is pulled out."
"SD Card not installed."
"SD Card Write
Protection"
"SD Size Over"
"Self Calibration"
"Transmit Error"
"Toner Cartridge Not
Installed"
"Tray #2 Left Cover
Open"
"Waste Toner Not
Installed"
"Waste Toner Cartridge
Not Installed"
88
Cause & Solution
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 16) or remove the jammed
paper (page 99).
L If feature #442 (page 65) is set to "Always",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 (page 65) is set to "On",
– view, print or save the received fax documents (page 51), and then
erase the unnecessary documents (page 52).
– turn the setting to "Off". The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to "On", and then print the received fax
documents (page 52).
L The same file name already exists in the SD card folder. See the other
displayed message instructions to continue saving the data.
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The SD card has been removed from the unit. Reinsert it (page 81).
L There is no SD card inserted in the unit. Insert one (page 81).
L The write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access (page 81).
L There is no space to save new data on the SD card. Erase unnecessary
data.
L The unit is changing the colour calibration. Wait for a while.
L A transmission error occurred. Try again.
L The toner cartridge is not installed. Install it (page 12).
L The left cover of the optional input tray is open. Close it.
L The waste toner cartridge is not installed. Install it (page 11).
Advertisement
Table of Contents
