Installing The Network Driver - 3Com 3CCFE575CT Quick Start Manual

Installing the Network Driver

Windows 2000, Windows 98, Windows 95 OSR 2, and Windows NT 4.0 driver
installation instructions are included in this Quick Start Guide. For complete
driver installation instructions, see the User Guide.
Windows 2000
1 Make sure that the CardBus PC Card is inserted and connected to the
network, as described earlier.
2 Turn the notebook on.
Windows will detect the card and install drivers provided with Windows
2000. No reboot is required
3 From the desktop, choose Start/Settings/Control Panel.
4 Double-click the System icon.
5 Select the Hardware tab.
6 Click Device Manager .
7 Open Network Adapters .
8 Double-click FE575C-3COM 10/100 LAN CardBus-Fast Ethernet .
9 Choose the Drivers tab.
10 Insert the 3Com 10/100 LAN CardBus Installation CD in the
CD-ROM drive.
11 Click the Update Drivers button.
12 When the Upgrade Device Driver dialog box appears, click Next .
13 If it is not chosen already, choose Search for suitable driver for my
device , and click Next .
14 Choose the CD-ROM drive search location, and click Next .
15 When Windows reports that "The wizard found a driver for the
following device," click Next .
16 Click Finish in the Completing the Upgrade Device Driver Wizard
dialog box.
17 Remove the CD from the CD-ROM drive.
If you are running TCP/IP using DHCP, you will be connected to the
network and will not need to reboot your notebook computer. If you are
not running this configuration, see your network administrator to adjust
your network settings.
– 9 –
English