Pair Devices; Block Devices - Nokia E72 User Manual

3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. The same passcode must be entered in
both devices.
When the connection is established,
displayed.

Pair devices

To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity, scroll
right.
Before pairing, create your own passcode (1 to 16 digits)
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1. To pair with a device, select
device. Devices that are within range are displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
3. Some audio enhancements connect automatically to
your device after pairing. Otherwise, scroll to the
enhancement, and select
audio device.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to the
device, and select from the following options:
Set as authorized
•
device and the authorized device can be made without
56
your knowledge. No separate acceptance or
Sending data
Options New paired
>
Options Connect to
>
in the device search.
— Connections between your
authorization is needed. Use this status for your own
devices, such as your compatible headset, PC or devices
that belong to someone you trust.
authorized devices in the paired devices view.
Set as unauthorized
•
device must be accepted separately every time.
is
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select
all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
Tip: If your device notifies you that the memory is
full when you try to receive data through Bluetooth
connectivity, change memory card as the memory
where the data is stored.

Block devices

Select Menu Ctrl. panel
>
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the
indicates
— Connection requests from this
Options
>
is displayed, and the item is
Connectivity
> >
Paired devices
Delete
.
tab.