Call Settings - Nokia E72 User Manual

Network — Adjust the network settings.
•

Call settings

Select Menu Ctrl. panel
>
Call.
Select from the following:
Send my caller ID — Display your phone number to
•
the person you are calling.
Send my internet call ID
•
address to the person you are calling using an internet
call. This setting is only available if you have defined
internet call service settings.
Call waiting — Set the device to notify you of incoming
•
calls while you are in a call (network service).
Internet call waiting
•
of a new incoming internet call while you are in a call.
This setting is only available if you have defined
internet call service settings.
Internet call alert — Select
•
alert for incoming internet calls. If you select Off, you
receive only a notification if you missed a call. This
setting is only available if you have defined internet call
service settings.
Decline call with msg.
•
message to the caller.
Message text — Write the standard text message that
•
is sent when you reject a call.
Own video in recvd. call
•
sending during a video call from your device.
Image in video call — Display a still image if video is
•
not sent during a video call.
Settings and Phone
>
— Display your internet call
— Set the device to notify you
On to set your device to
— Reject a call, and send a text
— Allow or deny video
Automatic redial
•
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press the end key.
Show call duration
•
>
during the call.
Summary after call
•
the call.
1-touch dialing
•
Anykey answer
•
Noise cancellation
•
cancellation.
Contact search
•
screen.
Network settings
Select Menu Ctrl. panel
>
Network.
To select the network mode, select
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
Tip: Selecting
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting
cause constant jumping between the two networks,
which also increases the demand on battery power.
To select the operator, select
Manual to select from available networks, or
to set the device to select the network automatically.
— Set your device to make a
— Display the length of a call
— Display the length of a call after
— Activate 1-touch dialing.
— Activate anykey answer.
— Activate earpiece active noise
— Activate contact search in the home
Settings and
>
Network mode
UMTS enables faster data transfer,
Dual mode
Operator selection
Phone
>
and
may
and
Automatic
125