Table of Contents
Advertisement
1. Insert a compatible memory card in the slot. Ensure
that the contact area on the card is facing up and
towards the slot.
2. Push the card in. You can hear
a click when the card locks into
place.
Remove the memory
card
Important: Do not remove the memory card during
an operation when the card is being accessed. Doing so
may damage the memory card and the device, and corrupt
data stored on the card.
1. Before you remove the memory card, press the power
key, and select
Remove memory
are closed.
2. When
Removing memory card will close all open
applications. Remove anyway?
Yes.
3.
Remove memory card and press 'OK'
4. Press the memory card to release it from the slot.
5. Pull out the memory card, and close the memory card
slot cover. If the device is switched on, select OK.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Switch the device on
and off
card. All applications
To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code or lock code,
is displayed, select
is displayed.
To switch off the device, press the power key briefly, and
select
enter it, and select OK. The preset lock code
is 12345. If you forget the code and your
device is locked, your device will require
service and additional charges may apply. For
more information, contact a Nokia Care point or your
device dealer.
Switch
off!.
15
Advertisement
Table of Contents
