Application Manager - Nokia E72 User Manual

applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select
profiles Options New server
> >
You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name — Enter a name for the configuration
•
server.
Server ID — Enter the unique ID to identify the
•
configuration server.
Server password — Enter a password to identify your
•
device to the server.
Access point — Select the access point to use for the
•
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you
have selected Internet
Host address — Enter the web address of the
•
configuration server.
Port — Enter the port number of the server.
•
User name and Password
•
password for the configuration server.
Allow configuration
•
to initiate a configuration session.
Auto-accept all requests
•
want the server to ask for your confirmation when it
initiates a configuration session.
Network authentication
•
http authentication.
Network user name and
•
your user ID and password for the http authentication.
Options Server
>
profile.
as the bearer type.
— Enter your user ID and
— Select Yes to allow the server
— Select Yes if you do not
— Select whether to use
Network password — Enter
This setting is available only if you have selected
Network authentication
To connect to the server and receive configuration settings
for your device, select Options
To view the configuration log of the selected profile, select
Options View log.
>
To update the device software over the air, select
Options Check for updates. The update does not erase
>
your settings. When you receive the update package on
your device, follow the instructions on the display. Your
device is restarted once the installation is complete.
Downloading software updates may involve the
transmission of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls, until
the installation is completed and the device is restarted.
Be sure to back up data before accepting installation of an
update.

Application manager

With Application manager, you can see the software
packages installed in your device. You can view details of
installed applications, remove applications, and define
installation settings.
to be used.
Start configuration.
>
115