Power Failure; Door Alarm - Sharp SJ-WS363T Operation Manual

Power Failure

While this feature is operating, it will indicate the rise of
inside temperature which may be caused by power failure.
1
Press the select button and select the power failure
icon.
(The icon is orange.)
2
Press the button. [
3
Press the button.
To cancel operation
It is the same process as activating this function.
Press the button in step 2.
Indication of power failure
• At the time of repower, if the inside temperature of the
refrigerator and freezer compartment becomes as follows,
R: more than 7 °C, F: more than -10
will blink slowly.
Blink slowly
• Check the quality of food before you eat.
How to cancel the indicator blink
Press the button while the icons are blinking.
Flashing
: ON, : OFF ]
°C , power failure icon

Door Alarm

• If the refrigerator door is left open, the door alarm will sound.
• The door alarm will sound after 1 minute of opening the
door and again after a further minute has passed.
(Once in each case)
• If the door is left open for approx. 3 minutes, the alarm will
sound continuously.
• Factory has set the door alarm to "ON".
To cancel operation
1
Press the select button and select the door alarm
indication like the below figure.
Flashing
2
Press the button. [
3
Press the button.
To start operation
It is the same method as cancelling the operation.
Press the button in step 2.
1
2
Door alarm indication
: ON, : OFF ]
The indication will disappear.
It shows Door alarm "ON".
3
9