What To Do; Empty The Ice Tray; Not In Use For A Long Time; Power Failure - Sharp SJ-GF60AR Operation Manual

What to do

In this case
Stop panel light
turning on at door
opening / closing
(Light turning off
setting on control
panel)
Empty the ice
tray
Not in use for
a long time

Power failure

Moving /
Transporting
On top of the
back surface
Fix with a tape, etc. to prevent
the doors from opening.
Light turning off setting on control panel is capable.
Setting
Press [ ] and [▲] for more than 3 seconds simultaneously (until 3 beeps sound).
The panel indication turns off.
Releasing...Same as above (beep)
① Empty the water tank and the ice case.
② Establish towels to a ice tray and close an ice compartment door.
③
Press [ ].
④
▲ ▼
Press [ ] or [ ] to select "Ice Tray Cleaning".
⑤
Press [ ] for more than 2 seconds (until sound beeps).
(Do not open the ice compartment door during operation)
⑥
When you hear the beep approx. 40 sec. later, throw away the water or ice cubes
in the ice case.
① Empty the ice tray. (Refer to above)
② Unplug it.
③ Clean the inside of the refrigerator and leave the doors open for a couple of days to
let it dry. (To prevent odor or mold from generating)
• Do not store more food nor open/close door during a power failure.
• At the time of re-power distribution, the states of each operation are as follows.
Energy saving・Plasmacluster (Auto)・Making ice cubes (except for Express
ice making)・Deep freezing・Light turning off setting on control panel・
Temperature control (including Advanced setting)
Plasmacluster (Deodorizing)・Express freezing・Hot food freezing・
Express ice making・Ice tray cleaning・Dew condensation prevention heater
is set "Weak "
① Empty the ice tray. (Refer to above)
② Unplug it.
③ Remove the foot cover and raise the
adjustable feet.
page page
④ To carry the refrigerator, lay a sheet, etc. for
protection on the path.
• Prevents scratches on the floor.
• If water remains on the evaporating pan inside the
refrigerator, it may become spilled on the floor.
⑤ Use the transport handles on the back and the
bottom of the product.
• Do not place sideways when transporting.Scratching and damage of the
machinery parts may occur as a result.
What to do
Items
32
Bottom
Transport wheels
(4 pieces)
• Move back and forth.
State at the time of
re-power distribution
Retain the settings
Cancel the setting
Back of refrigerator
Evaporating pan
(You cannot see this
from the outside.)
When moving back and forth
Use the transport
wheels.
• Do not try to move
it forcibly or slide it
in the lateral
direction. It may
damage the floor.
49