Specifications - Toa P-2240L Operating Instructions Manual

11. SPECIFICATIONS

Model No.
Power Source
Rated Output
Power Consumption
(EN60065)
DC Current Consumption
(at rated output)
Frequency Response
Distortion
Line In/Loop Out
Inputs
Speaker Line In
Speaker Out
100V
Outputs
70 V
4Ω
S/N Ratio
Tone Controls
Front Panel
Controls
Rear Panel
Indicators
Ventilation
Finish
Dimensions
Weight
L, H and S A are the identic ally same spe cific ati ons, but onl y pow er supp ly cord, AC pow er sour ce and mas ter
th ro ug h facili ty is d ifferen t.
Note:
0dBV = 1.0V
Specifications are measured on 240V AC for H and SA version and 120V for L version.
The design and specifications are subject to change without notice for improvement.
P-2240 L
110 - 120 V AC or 24 V DC
240 W
238 W
15 A
50 - 20,000 Hz, ±3 dB
Less Than 1% at 1kHz, 1/3 Rated Power
0 dBV (1V), 10 kΩ, Balanced, Screw Terminal
40 dBV (100 V), 330 kΩ, Unbalanced, Screw Terminal
All Speaker Outputs are Floating Balanced
42 Ω
21 Ω
31 V
Over 60 dB
Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
1-Master VR, 1-Bass Tone VR, 1-Treble Tone VR (semi-fixed type)
1-Power Switch
1-Speaker Line In VR (semi-fixed type),
1-Remote Power Control Terminal
1-Remote Master Through Control Terminal (only H and SA version)
Power LED, Signal LED, Peak LED
Fan Cooling
Panel: ABS Resin, Black
Case: Steel Plate, Black
420(W) x 101(H) x 360(D) mm
16.54(W) x 3.98(H) x 11.02(D) inches
13.2 kg
29.10 lb
11
P-2240 H
220 - 240 V AC or 24 V DC
P-2240 SA
220 - 240 V AC or 24 V DC