Table of Contents
Advertisement
10. SPECIFICATIONS
Power Source
Amplification System
Power Consumption
Input
Output
Frequency Response
Total Harmonic Distortion
S/N Rate
LED Indicator
Cooling
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Accessory
2/3 rated, 8Ω/CH
0 dB = 1 V
The power is tested under the condition of 40ms burst 1kHz sin wave and 1% THD.
* The power is tested under the condition of 20ms burst 1kHz sin wave and 1% THD.
Note: The design and specifications are subject to change without notice for improvement.
11. DIMENSIONAL DIAGRAM
T12.5AL AC250V
12
100 - 240V AC, 50/60 Hz
Class D
CH1-2 : 20kΩ ( balanced ) / 10kΩ
XLR-F connector
LINK CH1-2 : XLR-M connector
SPEAKER 1-2 :
2 channels : 700Wx2 (8Ω
1 channels(BRIDGE) : 2500Wx1 (8Ω)*
NL4 SPEAKON connector
20Hz - 20kHz (+/-3dB)
≤0.15%
≥100dB
Protect (red)/ Clip (red)/ -5dB(green)/-10dB(green) / -20dB(green) /
Signal(green) / Power(green)
Air flow from front to rear
0℃~+35℃ (32℉ to 95℉)
80% RH or less (no condensation)
Case : plated steel sheet, black
483 (W) x 89 (H) x 305 (D) mm [19.02" x 3.5" x12.01"]
6.4kg [14.11 lb]
Power Cable ...2
Rear View
483 [ 19.02" ]
430 [ 16.93" ]
Front View
,1250Wx2 (4Ω)*
Unit: mm [in]
305 [ 12.01" ]
267 [ 10.51" ]
Side View
,
Advertisement
Table of Contents
