Using Call Block - Radio Shack 43-337 User Manual

Using Call Block

If you subscribe to Caller ID, you can block incoming calls by adding numbers to the call block list.
• When either line receives a call, the phone compares the received phone number to the
numbers on the call block list. If the phone number is on the list, the phone replaces the caller's
name with Call Blocked
• The call block list holds 20 entries; this list applies to all stations and both lines.
• You can add a number to the call block list through the CID list options (see "Caller ID and Redial
Menu Options" on page 25), or through the
• Only one station can edit the call block list at a time.
Call blocking menu options
With the phone in standby, open the menu and select
options:
Menu option:
View Number
Create New
Private Number
Unknown Number
Call block entry options
With the phone in standby, open the call block list and fi nd the entry you want. Press
open the individual entry menu. Choose one of these options:
Menu option:
Edit
Delete
and disconnects the call. (The caller hears a reject tone.)
Use it to:
See the numbers on your call block list.
Add an entry to your call block list. The phone will prompt you to enter a
name and phone number.
Block all calls from numbers reported by CID as "Private." (This does not
count as one of the 20 entries.)
Block all calls from numbers reported by CID as "Unknown." (This does not
count as one of the 20 entries.)
Use it to:
Edit this entry. The phone will prompt you to edit the name and phone
number.
Erase this entry from the list and allow calls from this number.
Call Blocking menu (see below).
Call Blocking
32
. Choose one of these
OPTIONS to