Making And Answering Calls; Working With Two Lines - Radio Shack 43-337 User Manual

Making and Answering calls

Making and Answering calls

Working with Two Lines

When performing common tasks, you can let the station use the primary line, or
you can manually choose a particular line for each task. Using the primary line
makes common tasks much simpler, but you will need to assign a primary line to
each station (see below).
If you want to...
make a call
- with the primary line
- by choosing a line
answer a call
When a call comes in, the soft keys blink to tell you which line is ringing.
- with the primary line
- by choosing a line
hang up
put a call on hold
switch lines during a call
(automatic hold)
mute the microphone
during a call
mute the ringer for this
call only
* On the base, pick up the corded handset to switch from the speaker to the earpiece.
From the base
Dial the number, and then
pick up the corded handset.
Dial the number, and then press
Pick up the corded handset.
Press the soft key for the line you want to answer.*
Return the handset to the
cradle.
Press INT'COM/HOLD; the soft key blinks to remind you
the line is on hold. To return to the call, press the soft key
LINE1 LINE2
( or ) for the holding line.
Press the soft key for the other line; the current call is
automatically put on hold (see above). To return to the call,
press the soft key for the holding line.
Press MUTE/EXIT.
Press again to turn the microphone back on.
While the phone is ringing,
press MUTE/EXIT.
21
From a cordless handset
Dial the number, and then
press TALK ( )/FLASH.
LINE1 LINE2
or .*
Press TALK ( )/FLASH.
Press END or return the
handset to the cradle.
MUTE
Press .
While the phone is ringing,
press END.