Resetting And Registering Handsets - Radio Shack 43-337 User Manual

Resetting and Registering Handsets

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the
registration information from the base and the handset:
Do you have the base the handset is registered to?
1. Press and hold END and # until the
2. Select Deregister HS.
Yes 3. Select the handset you want to reset.
4. When the handset asks you to confi rm, select
The handset clears its information from the base and deletes its own link to the base.
1. Press and hold END and # until the
2. Select Base Unavailable
No
3. When the handset asks you to confi rm, select
The handset deletes its own link without contacting the base.
When you reset a handset (or if you buy a new one), that handset displays a
Registered message. If you see this message on a handset, you need to register it to a base
before you can use it.
Registering a handset
1. On the base, open the menu and select
2. On the handset you want to register, press and hold # until the handset display says
Registering (about 2 seconds).
3. In about 30 seconds, the handset display should say
Press TALK ( )/FLASH and make sure you get a dial tone.
If...
- you don't hear a dial tone
- the display says
n Note: To register a handset to a different base, see the section "Expanding Your Phone" in the
user's guide for the other base.
The display lists all registered handsets.
.
Register Handset
Registration Failed
System Reset menu appears (about 5 seconds).
Yes . (It may ask you twice, just to be sure.)
System Reset menu appears (about 5 seconds).
Yes . (It may ask you twice, just to be sure.)
.
Registration Complete
Try...
making sure the handset is fully charged,
and then start over at step 1.
42
Handset Not
Handset
.