Ec-Declaration Of Conformity - Jonsered CS 2245 Operator's Manual

EC-declaration of conformity

(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Jonsered CS 2245, CS 2250 from 2008's serial numbers and onwards (the year is clearly stated in plain text on the type
plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11681-1:2004
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificates for
EC type examination in accordance with annex VI, have the numbers: 404/08/1246 - CS 2245, CS 2245S
404/08/1247 - CS 2250S.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certificates have the numbers: 01/161/073 - CS 2245, CS 2245S 01/161/072 - CS 2250S.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 28 April 2008
Bengt Frögelius, Development director chainsaw R
TECHNICAL DATA
English – 41