Bar And Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Jonsered 435e Operator's Manual

Bar and chain combinations

The following cutting attachments are approved for the models Husqvarna 435, 435e and 440e.
Bar
Length, inch Pitch, inch
13 0,325
15 0,325
16 0,325
18 0,325
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 435, 435e and 440e from 2009's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11681-1:2004
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates
for EC type examination in accordance with annex IX, have the numbers: 0404/09/2012.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The certificates have the numbers: 01/161/075 - 435, 435e, 01/161/074 - 440e.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 29, 2009
Bengt Frögelius, Development director chainsaw R&D
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
1153135-26 Rev.1 2009-12-29
TECHNICAL DATA
Gauge, mm Max. nose radius
1,3 10T
1,3 10T
1,3 10T
1,3 10T
Chain
Length, drive links
Type
(no.)
Husqvarna H30 56
Husqvarna H30 64
Husqvarna H30 66
Husqvarna H30 72
English – 31