Table of Contents
Advertisement
The Firmware Upgrade Utility
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for
upgrading the KVM switch's firmware. To run the firmware, you will need to use a windows based PC with an
available serial port.
The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware
upgrade packages are posted on our web site as new firmware revisions become available. Check the web
site regularly to find the latest packages and information relating to them:
http://www.iogear.com
Before You Begin
To prepare for the firmware upgrade, do the following:
1.
From a computer that is not part of your KVM installation, go to the IOGEAR support site and select
the product part number (GCS1772 or GCS1774) to get a list of available Firmware Upgrade
Packages.
2.
Choose the Firmware Upgrade Package you want to install (usually the most recent), and download
it to your computer.
3.
Use the Firmware Upgrade Cable provided with this unit, to connect to a serial port on your
computer to the Firmware Upgrade Port of your switch.
29
Advertisement
Table of Contents
