Audio Screen - Toshiba IP4100 Series User Manual

IPedge & Strata CIX
Getting Started
Handset name
Reset settings
Status
Auto Answer
Silent charging
Do not disturb

Audio Screen

Ring Volume
Ring Melody
Alert Volume
Alert tone
Vibrator
12
Change the name the handset displays on the standby screen.
Reset all the options on this handset to factory default values (see
Handsets" on page 23)
The status screen displays the following information (you will have to scroll
down to see all the fields):
The IP address, MAC address, and system name of the base this handset is
registered to.
The hardware version and software version of the base this handset is regis-
tered to.
The hardware version and the software version of this handset.
The current band DECT radio band the handset is operating in.
The handset's battery level.
The handset's IPEI.
Choose how you want the handset to answer incoming calls:
Normal (default): you must press Talk to answer calls.
Any key: you can press any key to answer calls.
Automatic: the handset answers all calls after 5 seconds.
Choose how the handset responds to incoming calls while it is charging:
Off: The handset rings normally and displays the incoming call screen.
Disconnected: The handset does not respond to incoming calls at all.
Silent: The handset does not ring, but it does display the incoming call screen.
Turn on the Do Not Disturb feature. See page 19 for more information.
Change the Ringer tone and Volume.
Set the ringer volume. Press Up to raise the volume and Down to lower the
volume. Press Select or OK when you're satisfied with the volume setting.
Choose this handset's ring melody. As you highlight each ring melody, press
Play to hear a sample. When you hear the melody you want, press Select.
Set the volume for notification tones. Press Up to raise the volume and
Down to lower the volume. Press Select or OK when you're satisfied with the
volume setting.
Choose the tone this handset uses for alerts and notifications. As you high-
light each tone, press Play to hear a sample. When you hear the tone you
want, press Select.
Have the handset vibrate on an incoming call or a notification. Select one of
the following:
• Off: The handset will not vibrate at all.
• Vibrate then ring: The handset will vibrate first, then sound the tone or
melody on the second ring.
• Vibrate only: The handset will only vibrate, not ring.
• Vibrate and ring: The handset will vibrate and ring at the same time.
TOSHIBA IP4000-series UG November, 2011
"Resetting