Sharp MX-5500N Manual page 22

[Colour Mode] key
Touch the [Colour Mode] key to open the colour mode setting screen for Scan to HDD.
The following settings can be selected for the scanning colour when the [COLOUR START] key (
& WHITE START] key (
Start key
[COLOUR START]
key
[BLACK & WHITE
START] key
When you have finished selecting the mode, touch the [OK] key.
Colour Mode
) is pressed.
Mode
Full Colour
Auto
2 Colour
Mono 2
Greyscale
Scan to HDD/Colour Mode
Colour Mode
Full Colour
Auto
2 Colour
B/W Mode
Mono2
The original is scanned in full colour. This mode is best for full colour
originals such as catalogues.
Even when the original is black and white, it is scanned as a full colour
original.
The machine detects whether the original is colour or black and white and
automatically selects full colour or black and white (greyscale) scanning.
Only the red areas of the original are changed to the selected colour;
colours other than red are scanned in black.
Red, green, blue, cyan, magenta, or yellow can be selected.
Colours in the original are scanned as black or white. This mode is best for
text-only originals.
The colours in the original are scanned in black and white as shades of
grey (greyscale).
22
OK
Greyscale
Scanning method
) or the [BLACK