Program Installation; Insert Installation Cd (Step 1); Install Application Program (Step 2); Install Driver (Step 3) - Extech Instruments MC200 User Manual

2. Program Installation

For detailed instructions on the software installation, please refer to the Manual on the
supplied Installation CD. The Program is installed according to the following 4 steps:

2.1 Insert Installation CD (Step 1)

Insert the supplied Installation CD into the PC CD-ROM Drive. The PC should
automatically read the disk and display the start-up prompt screen process.
If the computer does not automatically read the CD, please open the Installation CD and
select Autorun.ext as shown below:
2.2 Install Application Program
Click on Install Application Program to install the software Application Program.
2.3 Install Driver
Click Install Driver to install the software driver.
2.4 Quit Installation Program
After installing the Application Program and Driver, please click Exit to quit the program
installation utility.
16 MC200-EU-EN V2.1 07/13