Sleep Operation - Hitachi RAS-SX10HAK Instruction Manual

SLEEP OPERATION

By configuring (SLEEP) operation while the sleep timer is set for auto, heating, dehumidifying, cooling and
dry cool modes, the air conditioner supports your comfortable sleeping environment.
• When in cooling operation, the temperature and humidity will be controlled in combination with dehumidifying
operation.
• When in dehumidifying or dry cool mode, temperature is controlled to a comfortable level with the preset
humidity target level of 60%.
• When in heating operation, temperature is controlled in the same manner as ordinary sleep mode.
• When in automatic operation, a control is executed according to the operation mode set by the auto
function.
Press the (FUNCTION SELECTOR) button
1
until (SLEEP) blinks.
While (SLEEP) is blinking, point the remote controller towards the unit
2
and press the (ON/OFF) button.
• A short beep sounds and
controller.
Press the (FUNCTION SELECTOR) button again until
blinks.
While (SLEEP) is blinking, point the remote controller towards the
STOP
unit and press the
• A short beep sounds and
controller.
– 22 –
(SLEEP) indicator turns on on the remote
(ON/OFF) button.
(SLEEP) indicator turns off on the remote
(SLEEP)