Advertisement
Setting the Timer on your GECO201
TIMER: GECO201 MODEL ONLY
Turn the outer dial of the timer in a clockwise
direction until the time of the day (24-hour clock)
corresponds with the triangular marking. One
complete turn of the dial corresponds to 24
hours.
There are 96 "riders", positioned around the dial,
each rider represents 15 minutes.
Where sets of "riders" are pushed in to the centre
of the timer the heater will turn on when they
travel past the triangle marking on the casing.
Where the "riders" are pushed to the outside of
the timer the heater will be off.
Example: If you want the heater to be on from
6pm to 10pm, then set all the riders from 18 to
22 to the centre of the timer and all other riders
to the outside of the timer. The unit will then turn
on automatically at 6pm and off again at 10pm
Indicates actual time
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday – Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
Advertisement
