Related Manuals for Goldair ecopanel GEPH211
Summary of Contents for Goldair ecopanel GEPH211
- Page 2 This page is intentionally left blank.
- Page 3 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 4 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • Do not connect the appliance to mains supply until completely assembled and adjusted. • Ensure hands are dry before handling the plug or main unit. •...
- Page 5 Components Screw pack components Heater x 1 Drill bits x 2 (1 x 7mm for plasterboard or wooden walls, 1 x 8mm for masonry walls) Mounting Plugs x 4 Screws x 4 Screw Caps x 4...
- Page 6 NOTE: Your Goldair EcoPanel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft furnishings.
- Page 7 THIS WAY UP NOTE: Your Goldair EcoPanel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft furnishings. Mark the positions of the four holes to be Install the panel heater onto the four rail fittings drilled on the wall.
-
Page 8: Operating Your Heater
Operating Your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front and 300mm from the sides of the appliance. - Page 9 OPERATING INSTRUCTIONS • Before plugging in and using your new Goldair panel heater, check all surfaces to ensure the heater is not damaged in any way. • Check that the On/Off switch is set to the Off position before plugging the heater into the mains supply.
- Page 10 Model No: GEPH211 Supply: 240VAC 50Hz Wattage: 425W SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm Phone +64 (0)9 917 4000 Phone +61 (0)3 9365 5100 Phone 0800 232 633 Phone 1300 465 324 info@cdb.co.nz...
-
Page 11: Three Year Warranty
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
Need help?
Do you have a question about the ecopanel GEPH211 and is the answer not in the manual?
Questions and answers