Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Goldair GECO200
Summary of Contents for Goldair GECO200
- Page 2 General Care and Safety Guide Thank you for choosing a Goldair Ecosave Panel Heater. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this booklet, will give you years of useful service.
- Page 3 Components Main Body x 1 Screw pack components Drill bits x 2 (1 x 7mm for plasterboard or wooden walls, 1 x 8mm for masonry walls) Rail Fittings x 4 Screw Caps x 4 Screws x 4...
- Page 4 Ensure all packaging and the wall mounting accessories pack has been removed from the unit before use. 300mm NOTE: Your Goldair Ecosave Panel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, side walls, ceilings, shelves and soft furnishings.
- Page 5 Decorating tip: All wall mounted heaters may cause paint to discolour or wall paper to lift. OPERATING INSTRUCTIONS Before plugging in and using your new Goldair panel heater, check all surfaces to ensure the heater is not damaged in any way.
- Page 6 For service or repair, contact an authorised electrical service technician. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. TECHNICAL SPECIFICATION Model No: GECO200, GECO200-2PK, GECO201 Supply: 220-240VAC 50Hz Wattage: 425W SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair –...
- Page 7 In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
Need help?
Do you have a question about the GECO200 and is the answer not in the manual?
Questions and answers