Advertisement
Wall Mounting Position Instructions
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging and wall mounting accessories
pack has been removed from the unit before use.
1.
Mark the positions of the four holes to be
drilled on the wall. (ensure there is a
300mm clearance on all sides of the
heater)
2.
Drill holes with an appropriate drill bit for
the material you are mounting the heater
on.
3.
Insert the plastic rail fittings into the holes.
4.
Install the panel heater onto the four rail
fittings matching the four holes on the
heater.
5.
Screw the four fasten bolts into the plastic
rail fittings.
6.
Put the caps onto the end of the fasten bolts.
It is recommended to use some normal glue
to stick the caps onto the bolts steadily.
Advertisement
