S.m.a.r.t. Information - Thecus N0204 miniNAS User Manual

Disks Information
Item
Disk No.
Capacity
Model
Firmware
Status
Bad Block Scan
Total Capacity
Disk Power
Management
NOTE

S.M.A.R.T. Information

On the Disks Information screen, the
status of each disk will be displayed in the
Status column. Clicking on an OK or
Warning link will display the S.M.A.R.T
Information window for that particular disk.
You may also perform disk SMART test,
simply to click "Test" to start with. The result
is only for reference and system will not take
any action from its result.
S.M.A.R.T. Information
Item
Tray Number
Model
Power ON Hours
Description
Indicates disk location.
Shows the SATA hard disk capacity.
Displays the SATA hard disk model name.
Shows the SATA hard disk firmware version.
Indicates the status of the disk. Can read OK, Warning, or
Failed.
Click Yet to start to begin scanning for bad blocks.
Shows the total SATA hard disk capacity.
The administrator can set the disk to power down after a period of
inactivity.
When the Status shows Warning, it usually means there are bad sectors on the
hard disk. It is shown only as a precaution and you should consider changing the
drives.
Description
Tray the hard disk is installed in.
Model name of the installed hard disk.
Count of hours in power-on state. The raw value of this attribute
41