Engine Oil Level Indicator; Mileage Recorder; Trip Recorder Zero Reset - PEUGEOT 508 Handbook

Hide thumbs Also See for 508:
Table of Contents

Advertisement

Monitoring

Engine oil level indicator*

On versions fitted with an electric oil level indicator, the state of the engine oil level is displayed in
the instrument panel for a few seconds, after the servicing information.
the level read will only be correct if
the vehicle is on level ground and the
engine has been off for more than
30 minutes.
Oil level correct
Oil level incorrect
this is indicated by the display of the message
"Oil level incorrect" in the instrument panel
screen, accompanied by the service warning
lamp and an audible signal.
If the low oil level is confirmed by a check using
the dipstick, the level must be topped up to
avoid damage to the engine.
Refer to the "Checking levels" section.
30
Oil level indicator fault
this is signalled by the display of the message "Oil
level measurement invalid" in the instrument panel.
Contact a PeugeOt dealer or a qualified
workshop.
In the event of a fault with the electric indicator,
the oil level is no longer monitored.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located under the bonnet.
Refer to the "Checking levels" section.
* Depending on version.

Mileage recorder

the total mileage is displayed in zone A of the
screen and the trip mileage in zone B.

Trip recorder zero reset

With the trip mileage displayed, press the
button for a few seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents