PEUGEOT 508 Handbook page 198

Practical information
F extend the jack 2 until its head comes into
contact with the jacking point A or B used;
the vehicle's contact surface at A or B must
engage with the central part of the head of
the jack.
196
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
ensure that the jack is stable. If the
ground is slippery or loose, the jack
might slip or drop - Risk of injury!
take care to position the jack only at
one of the vehicle's jacking points A or
B under the vehicle, ensuring that the
contact surface of the vehicle's jacking
point is centred on the head of the jack.
Otherwise there is a risk of damage to
the vehicle and/or that the jack might
drop - Risk of injury!