Fitting A Wheel - PEUGEOT 508 Handbook

Fitting a wheel

Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting, it
is normal to notice that the washers
do not come into contact with the
"space-saver" spare wheel. the wheel
is secured by the conical surface of
each bolt.
After changing a wheel
to store the punctured wheel in the
boot correctly, first remove the central
cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a PeugeOt dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
Practical information
List of operations
F Put the wheel in place on the hub.
F Screw in the bolts fully by hand.
F Pre-tighten the security bolt using the
wheelbrace 1 fitted with the security
socket 4.
F Pre-tighten the other bolts using the
wheelbrace 1 only.
8
197