Starting And Stopping; Before Starting; Starting; Stopping - Husqvarna K 3000 Operator's Manual

Before starting

WARNING! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
Make sure no unauthorised persons are
in the working area, otherwise there is a
risk of serious personal injury.
Check that the mains voltage
corresponds with that stated on the
rating plate on the machine.
• Perform daily maintenance. See instructions in the
section "Maintenance".

Starting

• Grip the front handle with the left hand.
• Grip the rear handle with your right hand.
• Press in the power switch lock with your right-hand
thumb and press in the power switch.
• Run the machine unloaded and in a safe manner for
at least 30 seconds.

STARTING AND STOPPING

Stopping

WARNING! The cutting blade continues
!
to rotate up to a minute after the motor
has stopped. (Blade coasting.) Make
sure that the cutting blade can rotate
freely until it is completely stopped.
Carelessness can result in serious
personal injury.
Stop the motor by releasing the power switch.
–
English 17