Maintenance; General; Maintenance Schedule - Husqvarna K 3000 Operator's Manual

General

WARNING! The user must only carry out
!
the maintenance and service work
described in this manual. More extensive
work must be carried out by an
authorized service workshop.
Inspection and/or maintenance should
be carried out with the motor switched
off and the plug disconnected.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
The life span of the machine can be
reduced and the risk of accidents can
increase if machine maintenance is not
carried out correctly and if service and/or
repairs are not carried out professionally.
If you need further information please
contact your nearest servicing dealer.
• Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Cutting blades" and "Assembly and settings".
Daily maintenance
External cleaning
Cooling air intake
Vac attachment
General inspection
Power switch*
Power switch lock*
Blade guard*
Cutting blade**
18 – English

MAINTENANCE

Weekly maintenance/40
hours
Carbon brushes
Every 4 months
Gearbox grease