Electrical Feed; Daily Maintenance - Husqvarna K3000 Cut-n-Break Operator's Manual

Electrical Feed

WARNING! Never use damaged cables. They
!
can cause serious, even fatal, personal
injuries.
• Check that the cord and extension cord are intact and in
good condition. Never use the machine if the cord is
damaged, hand it in to an authorized service workshop for
repair.

Daily maintenance

1 Check that nuts and screws are tight.
2 Check that the power switch unit works smoothly.
3 Check the ground fault circuit interrupter
4 Clean the outside of the machine.
5 Checking the blade guard
6 Check the condition of the cutting blade.
7 Check and clean the cooling air openings.
8 Check that the cord and extension cord are intact and in
good condition.
MAINTENANCE
8
– 17
English