Controls, Electrical Components - Husqvarna K7000 Ring Workshop Manual

1 2
Electrical connec-
tion to HF unit
Throttle

CONTROLS, ELECTRICAL COMPONENTS

Display
1. The yellow cable on the right is removed by undoing the
locking screw on the top.
2. The grey cable on the left is locked with a spring. Insert a small
screwdriver in the recess just to the right of the cable and pull this
out. Also fitted in a similar way.
Switch
The switch can be replaced. Push out the shaft of the starter
inhibitor and fold this back. The switch cam then be pulled out
of the control unit.
Wiring diagram
Motor
Display
Throttle
X2
Motor
X2
X1
13
27