Paper Type - Kyocera Mita FS-1010 Operation Manual

Paper Type

5.4 Paper Type
The printer is capable of printing under the optimum setting for the type of
paper being used.
Setting the paper type for the paper source by using the Remote Operation
Panel utility will cause the printer to automatically select the paper source
and print in the mode best suited to that type of paper.
A different paper type setting can be made for each paper source including
the MP tray. Not only can preset paper types be selected, but it is also
possible for you to define and select customized paper types. See section
1.4.7 Setting the Weight of the Custom Paper Type 1.4.7 Setting the Weight of the Custom Paper Type
1.4.7 1.4.7 Setting the Weight of the Custom Paper Type Setting the Weight of the Custom Paper Type
The following types of paper can be set.
Paper Source Paper Source Paper Source Paper Source
Paper Type Paper Type
Paper Type Paper Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Custom 1 (to 8)*
* This is a paper type defined and registered by the user. Up to eight types of user settings may
be defined. For details, see section
1-25 1-25
page 1-25 1-25 .
Table 5.5 Paper Type
MP Tray MP Tray Paper Cassette Paper Cassette
MP Tray MP Tray Paper Cassette Paper Cassette
! !
! "
! !
! "
! !
! !
! "
! !
! !
! !
! !
! "
! "
! !
! : Can be stored
1.4.7 Setting the Weight of the Custom Paper Type 1.4.7 Setting the Weight of the Custom Paper Type
1.4.7 1.4.7 Setting the Weight of the Custom Paper Type Setting the Weight of the Custom Paper Type
5-11
1-25 1-25
on page 1-25 1-25 .
Paper Weight Paper Weight
Paper Weight Paper Weight
Normal
Heavy (Thick)
Normal
Normal
Normal
Normal
Light (Thin)
Normal
Normal
Normal
Normal
Normal
Heavy
Normal
" : Cannot be stored
on