Part Names And Functions - Mitsubishi Electric City Multi PLFY-P06NLMU-E Technical & Service Manual

2

PART NAMES AND FUNCTIONS

G Indoor (Main) Unit
Long-life filter
Removes the sucked-in dust and dirt.
Since the long-life filter is used as an air
filter, it should be cleaned at the begin-
ning of air-cooling and heating seasons.
(During seasons with large amounts of
dust and dirt, more frequent cleaning are
recommended.)
G Remote controller
[Operation buttons]
1 [Set Temperature] Button
2 [Timer Menu] Button
[Monitor/Set] Button
3 [Mode] Button
[Return] Button
4 [Timer On/Off] Button
[Set Day] Button
• Ne ver expose the remote controller to direct sunlight. Doing so can result in the erroneous measure-
ment of room temperature.
• Never place any obstacle around the lower right-hand section of the remote controller. Doing so can
result in the erroneous measurement of room temperature.
[PAR-21MAA]
G
Once the controls are set, the same operation mode can
be repeated by simply pressing the ON/OFF button.
1
2
MENU
3
BACK MONITOR/SET
PAR-21MAA
5 [Louver] Button
[Operation] Button
6 [Fan Speed] Button
7 [Airflow Up/Down] Button
[Ventilation] Button
8
[Operation] Button
9
[Check/Clear] Button
TEMP. ON/OFF
ON/OFF
FILTER
DAY
CHECK
OPERATION
CLOCK CLEAR
D 4 5 6 8
Autovane
Disperses the airflow up and down and
adjusts the angle of the airflow.
Air inlet
Sucks the ambient air in.
B
7
A
TEST
0
C
9
0 [Test run] Button
A
[Filter] Button
[ ] Button
B
[ON/OFF] Button
Position of built-in room temperature
C
D
[Set Time] Button
4