Equipment Overview - Skoda Amundsen Operating Instructions Manual

Equipment overview

Fig. 1 Equipment overview
- Setting up button
1

›
for switching the equipment on and off (press)
›
for volume control (turn)
- Radio operation
2 RADIO
- MEDIA operation
3 MEDIA
- Phone mode
4
PHONE
- Navigation operation
5
NAV
6 - Displaying TMC traffic alerts
TMC
- Settings in the individual operating modes
7 SETUP
and - buttons for moving forwards/backwards
8
 
CD case
9
Screen
10
- Eject a CD
11

- Additional information and functions depending on the current
12

operating mode
4
General information
- Return to previous menu item
13

AUX input - Connect an external audio source
14
Menu button
15
›
Select a function or a sub-menu, confirm a value (press)
›
Move between functions or sub-menus, set a value (turn)
SD memory card slot
16
Function keys - Function is context-dependent
17
Switching the device on/off
›
To switch the unit on/off, press setting-up button
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit
will switch off automatically.
If your vehicle is fitted with the KESSY system, the unit will switch off automati-
cally after the engine is turned off and the door is opened. If you open the door
before turning off the engine, the unit will not switch off until the vehicle is
locked.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery).
Setting the volume
4
›
8 To increase the volume, turn setting-up button
›
To decrease the volume, turn setting-up button
10
14
The change in volume is displayed in the screen of the unit.
17
If the volume is reduced to 0, the speakers are muted. The following symbol will
23
appear on the screen .
7
CAUTION
11
High volumes can cause hearing damage.
5
11
12
11

.
1

clockwise.
1
counter-clockwise.
1
