Onkyo LS-B40 Instruction Manual

PACKAGE CONTENTS
* 2 9 4 0 1 5 3 3 *
LS-B40
Make sure you have the following items before use.
‡
Soundbar System The number in parenthesis indicates the quantity.
‡
In catalogs and on packaging, the letter at the end of the product name
Instruction Manual
indicates the color.
Main unit (1) AC adapter (1)/ IR flasher (1)
Power cord (1)
Thank you for purchasing an Onkyo product. Please read this manual thoroughly before
making connections and plugging in your new Onkyo product.
Following the instructions in this manual will enable you to obtain optimum performance and
listening enjoyment from your new product.
Remote controller (RC-877S) (1) Optical digital audio ф3.5 mm stereo mini
Please retain this manual for future reference.
A lithium-ion battery (CR2025) is supplied in
cable 5 ft. (1.5 m) (1) plug cable (1)
the remote control at the time of purchase.
Trademarks and Licensing
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Wall mounting template (1) Stand (2)/Cushion (4)/
The Bluetooth® word mark and logos are registered
Mounting screws (3/8" (10 mm)) (4)
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Onkyo is under license. Other trademarks and trade
names are those of their respective owners.
AuraSphere™ is a trademark of Onkyo Corporation.
AuraSphere is a listening experience technology developed by Onkyo
Corporation and Sonic Emotion ag.
E n
2
D1308-0
1. Attach the template to the position to mount.
‡
PREPARATION Be careful not to make a tape mark on the wall.
‡
Stand at a distance and check its position. Check if it is horizontal.
2. Mark the two screw points with a pen.
Placement
Select an appropriate placement for your environment.
‡
To enjoy the best sound, do not place an object on both sides of the unit.
Mounting to Wall
Wall mounting
template
‡
Leave 1" (25 mm) between the soundbar and your TV.
Refer all servicing to qualified service personnel.
3. Remove the template and screw the screws into the wall.
‡
Use the screws with 3/16" (4 mm) diameter.
Accessories to be prepared: Wall mounting template ‡
Keep 5/16" (8.5 mm) of the screw protruding from the wall surface.
‡
Do not use the supplied mounting screws for stand.
Wall
3/16" (4 mm)
5/16" (8.5 mm)
3 4
4. Connect all cables to the soundbar. (o See 7 to 8 pages) Mounting on Low Board or TV Stand
5. Insert the head of the screw into the keyhole slot of the soundbar and fix it
firmly.
‡
Please confirm that the head of the screw is at the top of the hole.
‡
Do not use the supplied stands.
Actual place
to apply the
Keyhole slot
screw
Accessories to be prepared: Stands, Cushion, Mounting screws
Before placing the soundbar on the boards, attach the supplied stands to prevent
falling.
(Front side)
Please note:
‡ (Back side)
When preparing the screws used for wall mounting, ask qualified service personnel
and give careful consideration to their type, material and length so that they can
withstand the weight. If reinforcement is necessary, use reinforcing plates or anchors.
‡
Onkyo is not responsible for accidents or damage caused by improper installation,
insufficient wall strength, improper screw installation or natural calamity, etc.
5 6
Connections
‡
Connect the TV and this unit using one of the possible connection cables.
4
2
3
1
SUBWOOFER PRE OUT terminal
1
COAXIAL jack
Connect a subwoofer sold commercially. ‡
Connect a separately sold cable to
Use the active subwoofer sold commercially.
‡
input the sound.
When you use a subwoofer, see the subwoofer's
instructions manual before connecting.
OPTICAL jack
IR OUT terminal
Connect the supplied optical
Connect the supplied IR flasher to allow the TV remote
digital audio cable to input audio.
control signal to pass through.
‡
Double-sided tape for mounting is attached to the
ANALOG jack
supplied IR flasher side. Mount to near the remote
Connect the supplied stereo mini
control signal sensor of TV with the double-sided
plug cable to input audio.
tape. (o P.9)
USB port
Connect a USB flash drive.
7 8
Remote control sensor of TV
IR Flasher
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN
http://www.onkyo.com/
The Americas
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
Listening to TV
http://www.us.onkyo.com/
For Product Support Team Only:
Turn on the TV.
‡ 1-800-229-1687
For details on operation, see the "BASIC OPERATION" (o P.11). http://www.us.onkyo.com/
‡
The unit can be operated with your existing TV remote controller. For details
Europe
on operation, see the "Using TV Remote Controller" (o P.17).
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
1 1 Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.eu.onkyo.com/
Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom
2 Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
China
(Hong Kong)
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.
3 Tel: 852-2429-3118 Fax: 852-2428-9039
2 3
http://www.hk.onkyo.com/
(Mainland)
1. Turn the power on. 1301, 555 Tower, No.555 West NanJing Road, Jing'an District, Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
2. Switch the input to TV. http://www.cn.onkyo.com/
(On the buttons of the unit, switches Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo SUPPORT site.
TV o USB o
in the order of
http://www.intl.onkyo.com/support/
Bluetooth.)
The above-mentioned information is subject to change without prior notice.
Visit the Onkyo web site for the latest update.
3. Adjust the volume.
SN29401533
9 (C) Copyright 2013 Onkyo Corporation Japan. All rights reserved.