Wireless Security Overview - ZyXEL Communications G-560 User Manual

802.11g wireless access point
Hide thumbs Also See for G-560:
Table of Contents

Advertisement

ZyXEL G-560 User's Guide
LABEL
Number of
Use this field to set a maximum number of wireless stations that may connect to the G-
Wireless
560.
Stations Allowed
Enter the number (from 1 to 32) of wireless stations allowed.
to Associate:
Output Power
Set the output power of the G-560 in this field. If there is a high density of APs within an
Management
area, decrease the output power of the G-560 to reduce interference with other APs.
The options are Full, 50%, 25% and 12%.
Preamble Type
Preamble is used to signal that data is coming to the receiver.
Short preamble increases performance as less time sending preamble means more
time for sending data. All IEEE 802.11b compliant wireless adapters support long
preamble, but not all support short preamble.
Select Long preamble if you are unsure what preamble mode the wireless adapters
support, and to provide more reliable communications in busy wireless networks.
Select Short preamble if you are sure the wireless adapters support it, and to provide
more efficient communications.
Select Auto to have the G-560 automatically use short preamble when all wireless
clients support it, otherwise the G-560 uses long preamble.
Apply
Click Apply to save your changes back to the G-560.
Reset
Click Reset to begin configuring this screen afresh.
6.4

Wireless Security Overview

Wireless security is vital to your network to protect wireless communication between wireless stations,
access points and the wired network.
The figure below shows the possible wireless security levels on your G-560. EAP (Extensible Authentication
Protocol) is used for authentication and utilizes dynamic WEP key exchange. It requires interaction with a
RADIUS (Remote Authentication Dial-In User Service) server either on the WAN or your LAN to provide
authentication service for wireless stations.
6-8
Table 6-1 Wireless Settings
The G-560 and the wireless stations MUST use the same
preamble mode in order to communicate.
DESCRIPTION
Wireless Screens

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents