ZyXEL Communications G-560 User Manual page 103

2. Click Network in the icon bar.
- Select Automatic from the Location list.
- Select Built-in Ethernet from the Show list.
- Click the TCP/IP tab.
3. For dynamically assigned settings, select Using DHCP from the Configure list.
4. For statically assigned settings, do the following:
-From the Configure box, select Manually.
-Type your IP address in the IP Address box.
-Type your subnet mask in the Subnet mask box.
-Type the IP address of your G-560 in the Router address box.
5. Click Apply Now and close the window.
6. Turn on your G-560 and restart your computer (if prompted).
Check your TCP/IP properties in the Network window.
Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
ZyXEL G-560 User's Guide
B-11