Maytag MHN31PDAWW Installation Instructions Manual page 13

CODE
n 00 Not Selected 'OFF'.
n CE Selected 'ON'. Press the QUICK CYCLE button
once for this selection.
g Press the WOOLENS button once to advance to
next code.
r. 800 TOP SPIN SPEED RPM
r. 800 This can be selected from the following spin
speeds: 600 rpm, 750 rpm, 800 rpm, 1000
(displays as 999) rpm. Step between speeds by
pressing the PERM PRESS button. Factory
default of 800 rpm.
g Press the WOOLENS button once to advance to
next code.
U. 00 PENNY INCREMENT OFFSET
U. 00 This represents the penny increment price offset
used in Generation 2 (Enhanced Debit) PR
models. Choose from 0-4 pennies by pressing the
PERM PRESS button.
Press the WOOLENS button once to advance to
g
next code.
PREWASH LENGTH
A1. 00
A1. 00 This is the number of minutes of PREWASH.
Choose 0 to disable the prewash or select
between 2 and 7 minutes by pressing the PERM
PRESS button.
g Press the WOOLENS button once to advance to
next code.
A2. 03 FINAL SPIN LENGTH
A2. 03 This is the number of minutes of final high speed
spin. Choose from 3-8 minutes by pressing the
PERM PRESS button.
Press the WOOLENS button once to advance to
g
next code.
EXPLANATION
If cycle counter (9 0C) is selected, the following is true:
1 00 Represents the number of
cycles in HUNDREDS
2 00 Represents the number of
cycles in ONES
This is "VIEW ONLY" and cannot be cleared.
Press the WOOLENS button once to advance to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00 Number of dollars in
HUNDREDS
4 00 Number of dollars in ONES
5 00 Number of CENTS
END OF SET-UP PROCEDURES
EXIT FROM SET-UP MODE
PD Models: Reinstall access door.
PR Model: Remove manual set-up cards.
1 02 = 200
2 25 = 25
TOTAL CYCLES = 225
3 01 = $100.00
4 68 = $ 68.00
5 75 = $ .75
TOTAL = $168.75
13