Maytag MHN31PDAWW Installation Instructions Manual page 12

CODE
VAULT VIEWING OPTION
A. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the DELICATES AND KNITS
button once for this selection. When selected, the
money and/or cycle counts will be viewable (if
counter option(s) is selected) when the coin box is
removed.
Press the WOOLENS button once to advance to
g
next code.
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number of
nickels: 05 = $0.25.
By pressing the PERM PRESS button, there is a
option of 1-199 nickels.
Press the WOOLENS button once to advance
g
to next code.
VALUE OF COIN 2
C. 20
C. 20 This represents the value of coin 2 in number of
nickels: 20 = $1.00.
C. 05 PR MODELS ONLY: Factory default of $0.25 By
pressing the PERM PRESS button, there is the
option of 1-199 nickels.
g Press the WOOLENS button once to advance to
next code.
d. 00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Replacement of meter case will
be needed for coin slide mounting.
d. 00 Not Selected 'OFF'.
d. CS Selected 'ON'. NOTE: This option needs to be
set to "00" unless the meter case has been
changed to accept a coin slide device. Press the
DELICATES AND KNITS button 3 consecutive
times for this selection.
When coin slide mode is selected, set 'b'. equal
to value of vend price in nickels. Set set-up
code 6 xx (regular cycle price) and set-up code
3.xx (special cycle price) to number of slide
operations. If the installer sets-up 'CS' and a coin
drop mechanism is installed, the washer will not
register coins that are inserted.
g Press the WOOLENS button once to advance to
next code.
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the
customer display to show the number of coins
(coin 1) to enter, rather than the dollars-and-cents
amount.
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'. Press the DELICATES AND KNITS
button 3 consecutive times for this selection.
Press the WOOLENS button once to advance to
g
next code.
12
EXPLANATION CODE
F. 00 ENHANCED PRICING OPTION
F. 00 Not Selected 'OFF'.
F. CP Cycle-Based pricing enabled. This option allows
configuration of different prices for cold, warm,
and hot water cycles.
F. Su Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing
extra money. Set-up codes "H." and "h." will be
displayed only when this option is enabled. Press
the DELICATES AND KNITS button once for this
selection.
g Press the WOOLENS button once to advance to
next code.
H. 01 SUPER CYCLE UPGRADE PRICE
(Skipped unless super cycle pricing is enabled.)
H. 01 This represents the number of coin 1 required to
upgrade a base cycle to a super cycle. Advance
from 0-39 by pressing the PERM PRESS button.
g
Press the WOOLENS button once to advance to
next code.
h. 01 SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
h. 01 This represents the Super Cycle upgrade option.
Press the PERM. PRESS button to step through
upgrade options 1 through 3 as follows:
01 - enhanced wash, extra 3 minutes of wash
tumble in addition to the programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press the WOOLENS button once to advance to
g
next code.
COIN/DEBIT OPTION
J. Cd
J. Cd Both coin and debit selected. Press the
DELICATES AND KNITS button 3 consecutive
times for this selection.
J. C_ Coins selected, debit disabled. Press the
DELICATES AND KNITS button 3 consecutive
times for this selection.
J. _d PR models factory default to J._d. Debit Card
selected, coins disabled. Press the DELICATES
AND KNITS button 3 consecutive times for this
selection.
J. Ed Enhanced Debit is self-selected when a
Generation 2 card reader is installed in the
washer. The Ed option cannot be manually
selected or deselected.
g Press the WOOLENS button once to advance to
next code.
L. 00 PRICE SUPPRESSION OPTION
This option causes the customer display to show
'ADD' or 'AVAILABLE' rather than the amount of
money to add. (Used mainly in debit installations.)
L. 00 Not Selected 'OFF.'
L. PS Selected 'ON.' Press the QUICK CYCLE button
once for this selection.
g Press the WOOLENS button once to advance to
next code.
n. CE CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle
activity will be cleared.
EXPLANATION