Electrical Safety; Hot Surface Safety - Beko WMG 11464 W User Manual

1.3 Electrical safety

If the product has a failure, it should not be operated unless it is
u
repaired by the Authorized Service Agent. Risk of electric shock!
This product is designed to resume operating in the event of
u
powering on after a power interruption. If you wish to cancel the
programme, see "Cancelling the programme" section.
Plug the product into a grounded outlet protected by a 13 A
u
fuse. Do not neglect to have the grounding installation made
by a qualified electrician. Our company shall not be liable for
any damages that will arise when the product is used without
grounding in accordance with the local regulations.
Do not wash the product by spraying or pouring water onto it! Risk
u
of electric shock!
Never touch the power cable plug with wet hands! Do not grab the
u
power cord to unplug the machine, always unplug it by holding
the socket with one hand, and pulling the plug with the other
hand.
Product should be unplugged during installation, maintenance,
u
cleaning and repair procedures.
If the power cable is damaged, it must be replaced by the
u
manufacturer, after sales service or a similarly qualified person
(preferably an electrician) or someone designated by the importer
in order to avoid possible risks.

1.4 Hot surface safety

7 / EN
While washing the laundry at high
temperatures, the loading door glass
will get hot. Considering this fact, during
washing operation keep the children away
from the loading door of the product to
prevent them touching it.
Washing Machine / User's Manual