Beko WMG 11464 W User Manual page 36

Adding laundry after the programme has started:
1. Press the Start / Pause button to switch the machine to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press Start / Pause button to start the machine.
C
If the water level in the machine is not suitable when you press Start / Pause button, the loading door
lock symbol remain lit on the display. To open the loading door, first pause the machine and drain the
water inside.
Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
You can select the new programme after switching the current programme to pause
mode.
C
The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the
auxiliary functions. See "4.6.8 Auxiliary function selection".
Also you can change temperature and cycle adjustments. See "4.6.6 Temperature
selection" and "4.6.7 Spin speed selection".
C
The loading door will not open if the water temperature in the machine is high or the water level is
above the door opening.
36 / EN
88
0 C
88:88
1888
88
C
0
88:88
1888
Washing Machine / User's Manual