For Macintosh; For Windows - Ricoh R10 Color Management Manual

6.
Select [Yes], and press the ADJ./OK button.
• The SD memory card is formatted.
Caution
If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in
your computer before formatting the card.
7.
Turn the camera off, and connect the camera and computer with the
provided USB cable.
• The camera turns on automatically. If the camera does not turn on automatically, press the
POWER button and turn the power on.
• If DC Software is installed in your Windows PC, DL-10 may automatically start up. In this
case, exit DL-10.
• Click [Cancel] if the [Removable Disk] dialog appears in Windows XP or Windows Vista.
• If iPhoto starts up in Mac OS X, exit iPhoto.
8.
Copy the file [elaunch8] (created when the file was extracted) into
[RICOHDCX] in [My Computer].
• The camera's drive name may differ depending on the OS you are running.
e.g. [Removable Disk], etc.

For Windows

9.
Open [RICOHDCX] in [My Computer], and confirm that the file [elaunch8]
has been copied.
10.
For Windows
When the copying of the firmware is completed, double-click the [Safely
Remove Hardware] icon in the task bar.

For Macintosh

Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon
has disappeared, proceed to Step 14.
Caution
If you skip the procedures in Step 10, the firmware copy may not be successful.
elaunch8
RICOHDCX
For Macintosh
3
elaunch8