Advertisement
6.
Select [Yes], and press the ADJ./OK button.
• The SD memory card is formatted.
Caution
If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in
your computer before formatting the card.
7.
Turn the camera off, and connect the camera and computer with the
provided USB cable.
• The camera turns on automatically. If the camera does not turn on automatically, press the
POWER button and turn the power on.
• If DC Software is installed in your Windows PC, DL-10 may automatically start up. In this
case, exit DL-10.
• Click [Cancel] if the [Removable Disk] dialog appears in Windows XP or Windows Vista.
• If iPhoto starts up in Mac OS X, exit iPhoto.
8.
Copy the files [hlaunch3] and [hlaunch8], created when the firmware was
extracted, into [RICOHDCX] root directory. The [RICOHDCX] will be
mounted as follows. For Windows, in [My computer]; for Macintosh, on
the desktop.
• The camera's drive name may differ depending on the OS you are running.
e.g. [Removable Disk], etc.
For Windows
9.
Confirm that the files have been copied.
10.
For Windows
When the copying of the firmware is completed, double-click the [Safely
Remove Hardware] icon in the task bar.
For Macintosh
Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon
has disappeared, proceed to Step 14.
Caution
If you skip the procedures in Step 10, the firmware copy may not be successful.
11.
Select [USB Mass Storage Device], and click [Stop].
12.
Click [OK].
hlaunch3
hlaunch8
RICOHDCX
For Macintosh
3
hlaunch3
hlaunch8
Advertisement
