Using scan functions
3
Using scan functions
3.1
General scan operation
Note
For details on the scan operation, refer to the User's Guide [Network
Scanner Operations].
!
Detail
Specify the scan settings and network settings and register destinations
before entering Enlarge Display mode. For details, refer to the User's
Guide [Network Scanner Operations].
This section contains information on the general operation for scanning.
To perform a scanning operation
1
Press the [Scan] key in the control panel, and then press the [Enlarge
Display] key.
The Scan mode screen appears in Enlarge Display mode.
2
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the doc-
ument" on page 1-10.
3
Specify the recipient.
–
For details on specifying recipients, refer to page 3-5.
C450
3
3-3