The Items Available In The Setup Display - Sony DRE-S777 Operating Instructions Manual

SETUP Display

The Items Available in the SETUP Display

Page 1
Item Setting range
Eject CD/MS ––
Rev mode Mono (1) in Stereo out
Stereo in Stereo out
Mono (1) in 4ch out
Split in 4ch out
Mono (1) in Stereo out 2Fs
Mono (2) in Stereo out
Mono (2) in 4ch out
Mono (2) in Stereo out 2Fs
AD to DO & DI to DA
AD to DO & DI to DA 2Fs
Direct/Rev CH1-2 D+Rev CH3-4 D+Rev
CH1-2 D+Rev CH3-4Rev
CH1-2 Rev CH3-4 D+Rev
CH1-2 Rev CH3-4 Rev
Load 01 to 99
Save 08 to 99
Page 2
32
Chapter 3 Operation
Eject CD/MS: Change CDROM/MS?
Rev mode : Mono(1)in Stereo out
Direct/Rev : CH1-2 D+Rev CH3-4 D+Rev
Load :
Save :
SETUP
Function
Use to change the CD ROM and the Memory Stick.
For details, see "Changing the CD ROM and the Memory Stick" on page 36.
Selects the reverb mode.
Read (1) for input channel 1, and (2) for input channel 2.
AD to DO & DI to DA means that the A/D converter and D/A converter are
connected directly to external equipment without reverb and mixer
processing.
2Fs is used to double the sampling frequency to 88.2 kHz or 96 kHz.
Note
Changing the reverb mode clears the reverb program, delay time and reverb
time set on the REVERB display.
Sets the sound to be reproduced in each channel.
Read D for direct sound, and Rev for reverberation.
CH3-4 is effective only when the reverb mode is Mono (1) in 4ch out, Mono
(2) in 4ch out or Split in 4ch out.
For details, see "Reverberation and delay adjustment" on page 37.
Assigns the memory number and loads the setup from the Memory Stick.
For details, see "Storing the Reverb Setup in the Memory Stick/Recalling it" on
page 34.
Assigns the memory number and stores the setup in the Memory Stick.
For details, see "Storing the Reverb Setup in the Memory Stick/Recalling it" on
page 34.
Warning :
LCD Ctl : Contrast[48]
LCD Dim : Back light Dim[ ON ]
Input Sel : Digital
Clock Sel : Internal 48.0 kHz
SETUP
Enter
Enter